Close
Skip to content

Bridgeport Rebuild Kits

M-Head-Rebuild-Kit

M-Head Rebuild Kit

The is a rebuild kit for the M Type Bridgeport head. It contains the V-Belt, (4) Spindle Thrust Bearings, and (2) Upper Head Bearings. Adding a drawbar will be extra, if no drawbar is needed please pick “No Drawbar Needed”.

Individual items in this kit may not be retuned for refund unless the entire kit is returned for refund. Kits are prepackaged and can not be sold with individual parts taken out. If you do not need the entire kit we can sell you the parts individually.

M-Head Rebuild Kit
Bridgeport-Rebuild-Kit-1

Top half Rebuild Kits

This kit contains everything you will need to complete a standard top half rebuild on your Bridgeport Series I Variable Speed Head (1-1/2 or 2 HP). Please specify whether your head is 1-1/2 or 2 HP. The kit includes the following new parts: Drive Belt(1105), Timing Belt (1-1/2hp 1115, 2hp 1536), Top Half Bearings (1-1542, 2-1558, 2-1277, 2-1491), 2 Tubes of Grease for the Bull Gear Area & a Bushing Rebuild Kit (1-1/2hp 1037-15, 2hp 1036-20)(front bushings & key, motor bushings & key, sleeves, epoxy, sandpaper & motor snap ring). If you are planning to repair your own head this is just what you need to get the job done right! We will also include step by step instructions for the rebuild. If you have a blue or teal bushing in the motor vari-disc you will have to replace the vari-disc assembly. Call us at 800-285-5271 with any questions. 

Top Half Rebuild Kit for 1-1/2 HP Bridgeport Head
Top Half Rebuild Kit for a 2 HP Bridgeport
Bridgeport-Rebuild-Kit-2

Bushing Kits

This is a brand new bushing repair kit for your Bridgeport Series I 2 Hp or 1-1/2 HP Variable Speed Head. The kit includes 2 front bushings, 2 motor bushings, 1 front key, 1 motor key, insertion spacers, epoxy glue, motor snap ring & roughing sandpaper. It is in stock and ready to go to work on your mill. Please Please specify whether you need a 2HP or 1-1/2HP kit. ORDER BELOW

Bushing Kit for Bridgeport with 1-1/2 HP Head
Bushing Kit for Bridgeport with 1-1/2 HP Head Without Gage Pins
1036-A Bushing Kit for Bridgeport with 2HP Head
Bushing Kit for Bridgeport with 2HP Head Without Gage Pins
Bridgeport-Rebuild-Kit-3

Spindle Rebuild Kits

This is a spindle rebuild kit for your Bridgeport Series I milling machine. This kit is for any spindle in the Series I group (Variable Speed or Step-Pulley Head). The kit includes one set of ABEC7 Precision Radial Thrust lower spindle bearings, a high speed (10,000 rpm) shielded upper bearing, high speed permanent grease and installation instructions. ORDER BELOW

Spindle Rebuild Kit for Bridgeport Series I Mill
Bridgeport-Rebuild-Kit-4

Top Half Rebuild Kit for BP Step Pulley

This kit contains everything you will need to complete a standard top half rebuild on your Bridgeport Series I “J” Head (Step Pulley). The kit includes the following new parts: Drive Belt(1), Timing Belt (1), Top Half Bearings (6) & a tube of grease for the bull gear area of the head. If you are planning to repair your own head this is just what you need to get the job done right! We will also include step by step instructions for the rebuild. Call us at 800-285-5271 with any questions. ORDER BELOW