The Vise Jaw Stop by Edge Technology is the most advanced jaw stop to date. It features a micro stop rod that is positioned below the top surface of the vise jaws for cutter clearance. The stop rod is also adjustable side-to-side to allow space between the unit and the workpiece for even more cutter […]
The Parallel Separator by Edge Technology is designed to firmly hold the parallel bars against the vise jaws during machining operations. This configuration prevents chips from being logged between the parallels and the bed of the vise and eliminates the need to clean the parallel bars every time the workpiece is removed from the vise. […]
The 2 Position Vise Handle by Edge Technology is a great alternative to the standard handle that comes with most vises. Our handle is smaller, faster and much more ergonomic. It provides the correct amount of leverage for clamping most work pieces. It also has a thumb knob that allows the handle to stay locked […]
The Indicator Holder by Edge Technology is a step above the rest. The smooth consistent resistance makes this tool a pleasure to use. Some other indicator holders use rods that can unintentionally be rotated during adjustment. Our design does not have any extra unnecessary movement of the indicator, it keeps the indicator tip on a plane […]
The Indicator Holder by Edge Technology is a step above the rest. The smooth consistent resistance makes this tool a pleasure to use. Some other indicator holders use rods that can unintentionally be rotated during adjustment. Our design does not have any extra unnecessary movement of the indicator, it keeps the indicator tip on a plane […]
With the Mill Caddy from Edge Technology you can now hang your vise handle, dead blow hammer and air line from the front of the milling machine table. The Mill Caddy allows for a less cluttered work area by placing your most frequently used tools out of the way. 06-000
The Mill Organizer by Edge Technology provides a secure place to store tooling and inspection equipment on the front of your milling machine table. • Designed to fit standard 6″ calipers. • Multiple compartments used to segregate endmills and prevent damage to cutting edges. • Mounts using 3/8″ T-slot on table front (mounting hardware included). […]
The Tailstock Alignment Bar by Edge Technology is used to align the tailstock to the headstock. Accurate alignment is critical to eliminate any taper in work pieces that are supported by the tail stock. Our Tailstock Alignment Bar makes the process of tailstock alignment fast, easy and accurate. 27-000
