Set of seven Brown & Sharpe round collets to fit spindles with a Brown & Sharpe taper. This set ranges from 1/8″ to 1/2″ by 16ths (1/8″, 3/16″, 1/4″, 5/16″, 3/8″, 7/16″, and 1/2″).
These collets are made from high-grade tool steel and are precision ground and hardened. Maximum runout is 0.0008″ (0.02 mm).
Drawbar thread is 3/8″-16, the width at the top is 0.725″ and the width at the bottom is 0.600″. Overall length is 3.15″.
| Hole Diameter | 1/8~1/2″ by 16ths |
| Drawbar End | 3/8″-16 |
