Edge Technology Chuck Stop
The Chuck Stop by Edge Technology is designed to locate shorter parts beyond the chuck jaws to provide clearance for facing operations. The Chuck Stop uses different height parallel bars to achieve the required spacing. A centering plug is used to keep the unit centered on the ID of the chuck. Strong neodymium magnets secure it to the face of the chuck.
• Parallel bars are heat treated and surface ground to 0.0002″ parallelism accuracy.
• Strong neodymium magnets secure the Chuck Stop to the chuck face.
• Chuck Spider is made from high-strength alloy.
• A centering plug fits the ID of the chuck and keeps the Chuck Stop centered.
• Included centering plug diameters are 1.4″, 2.0″, 2.5″, 3.0″, 3.5″, and 4.0″
• The Chuck Stop is 6.0″ in diameter.
• Designed for 3 jaw chucks only.
• For use on 6″ diameter chucks and larger.
• Minimum stock diameter is 0.800″
The set includes the following:
A case with 10 sets of parallel bars. Bar heights are 1/2″ to 1-5/8″ in 1/8″ increments.
One Chuck Spider with neodymium magnets
6 different size centering plugs